19100 : Osmium Tetroxide 1 g.
Osmium Tetroxide, Crystalline, Highest Purity, 99.95%
(Osmic Acid Anhydride)
OsO4 F.W. 254.20 CAS #20816-12-0
Melting Range : 39.5-41.0°C
Boiling Point : 129.7°C
Vapor Pressure @25°C: 9.8 mmHg
Solubility: 5.07% in Cold Water; 6.5% in Hot Water; 25.0% in CCl4
Osmium Purity: >99.95%
Non-Volatile matter: <0.02%
Small size (2 ml), Light-gauge, pre-scored amber glass ampoules. Ampoules containing OsO4 Crystal, are pre-cleaned and heat sealed in plastic bags to assure a contaminant-free solution. Ampoules are also free of pressure-sensitive labels and, therefore, do not require cleaning prior to solution preparation.
Please call us for special prices on all other quantities and package sizes.
Supplier : Electron Microscopy SciencesIntroduction
A 2% solution of Osmium Tetroxide can be fully neutralized by twice the volume of oil (corn oil is preferred because of its high percentage of unsaturated bonds).1 That is to say, for every 10 ml of 2% Osmium Solution, 20 ml of corn oil is required.
Procedure
Do all work under fume hood.
Pour twice the volume of corn oil into used Osmium Tetroxide Solution.
Wait for the oil to completely turn black.
Test to check that complete neutralization has taken place. (To confirm neutralization; take either a glass cover-slip coated in corn oil or a piece of filter paper soaked in corn oil and suspend it over the solution. Blackening indicates OsO4 is still present.)2
Dispose in accordance to local regulations. Contact your Disposal Agency or Environmental Health & Safety Office at your Institute to obtain local regulations.
References
Cooper, K. Neutralization of Osmium Tetroxide in case of accidental spillage and for disposal. Bulletin of The Microscopical Society of Canada. 1988. 8: 24-28
Lunn, G.; Sansone, E.B. Osmium Tetroxide. Destruction of Hazardous Chemicals in the Laboratory; Program Resources, Inc. Frederick, MD; p 211 - 213.